Firmware for HexBoard MIDI controller
Diffstat (limited to 'HexBoard_V1.1.ino')
| -rw-r--r-- | HexBoard_V1.1.ino | 54 |
1 files changed, 43 insertions, 11 deletions
diff --git a/HexBoard_V1.1.ino b/HexBoard_V1.1.ino index 2e5353f..b7f7ede 100644 --- a/HexBoard_V1.1.ino +++ b/HexBoard_V1.1.ino @@ -216,7 +216,20 @@ Lane lanes[NLANES]; int sequencerStep = 0; // 0 - 31 -bool sequencerMode=1; +// You have to push a button to switch modes +bool sequencerMode=0; + +void handleNoteOn(byte channel, byte pitch, byte velocity) +{ + // Rosegarden sends its metronome this way. Using for testing... + if(1 == sequencerMode && 10 == channel && 37 == pitch) { + if(velocity == 120) { + // Round to nearest bar (so we have 2 bars) + sequencerStep = ((sequencerStep+1)/16)*15; + } + sequencerPlayNextNote(); + } +} // MENU SYSTEM SETUP // // Create menu page object of class GEMPage. Menu page holds menu items (GEMItem) and represents menu level. @@ -282,19 +295,21 @@ byte midiVelocity = 100; // Default velocity // ------------------------------------------------------------------------------------------------------------------------------------------------------------ void setup() { -lanes[0].instrument = 36; // Bass Drum 1 -lanes[1].instrument = 40; // Electric Snare -lanes[2].instrument = 46; // Open Hi-Hat -lanes[3].instrument = 42; // Closed Hi-Hat -lanes[4].instrument = 49; // Crash Cymbal 1 -lanes[5].instrument = 45; // Low Tom -lanes[6].instrument = 50; // Hi Tom + lanes[0].instrument = 36; // Bass Drum 1 + lanes[1].instrument = 40; // Electric Snare + lanes[2].instrument = 46; // Open Hi-Hat + lanes[3].instrument = 42; // Closed Hi-Hat + lanes[4].instrument = 49; // Crash Cymbal 1 + lanes[5].instrument = 45; // Low Tom + lanes[6].instrument = 50; // Hi Tom #if defined(ARDUINO_ARCH_MBED) && defined(ARDUINO_ARCH_RP2040) // Manual begin() is required on core without built-in support for TinyUSB such as mbed rp2040 TinyUSB_Device_Init(0); #endif usb_midi.setStringDescriptor("HexBoard MIDI"); + // Callback will be run by MIDI.read() + MIDI.setHandleNoteOn(handleNoteOn); // Initialize MIDI, and listen to all MIDI channels // This will also call usb_midi's begin() MIDI.begin(MIDI_CHANNEL_OMNI); @@ -437,6 +452,8 @@ void commandPress(byte command) { strip.setPixelColor(cmdBtn3, strip.ColorHSV(65536 / 2, 255, pressedBrightness)); } if (command == CMDB_4) { + // Zach's feature to switch modes. + sequencerMode = !sequencerMode; } if (command == CMDB_5) { } @@ -644,20 +661,28 @@ void sequencerToggleThingies() { // newpress if (activeButtons[i]){ int stripN = i / 20; + if (stripN >= NLANES) continue; // avoid an error. int step = map2step(i % 20); - if (step >= 0 && stripN < NLANES){ + if (step >= 0){ int offset = lanes[stripN].bank*16; lanes[stripN].steps[step+offset] = !lanes[stripN].steps[step+offset]; int color = 0; if(lanes[stripN].steps[step+offset])color = 255; strip.setPixelColor(i, color, color, color); - + } else if(step == -1) { // switching banks + lanes[stripN].bank = !lanes[stripN].bank; + int offset = lanes[stripN].bank*16; + for (int j=0; j < 16; j++){ + int color = 0; + if(lanes[stripN].steps[j+offset])color = 255; + strip.setPixelColor((stripN*20)+step2map(j), color, color, color); + } } } } } } -// TODO: Redefine this for hexboard v2 +// TODO: Redefine these for hexboard v2 int map2step(int i){ if(i >= 10){ return (19-i)*2; @@ -665,8 +690,15 @@ int map2step(int i){ if (i<=8) { return ((8-i)*2)+1; } + if (i==9) return -1; // command button return -1; } +int step2map(int step){ + if (step%2){ + return 8-((step-1)/2); + } + return 19-(step/2); +} void sequencerMaybePlayNotes(){ // TODO: sometimes call sequencerPlayNextNote(); |