v1.1: un-refactor

1 files changed, 0 insertions, 77 deletions

diff --git a/Buttons.ino b/Buttons.ino
deleted file mode 100644
index ecc209f..0000000
--- a/Buttons.ino
+++ /dev/null
@@ -1,77 +0,0 @@
-void readDigitalButtons() {
-  if (diagnostics == 1) {
-    Serial.println();
-  }
-  // Button Deck
-  for (int rowIndex = 0; rowIndex < rowCount; rowIndex++)  // Iterate through each of the row pins on the multiplexing chip.
-  {
-    digitalWrite(m1p, rowIndex & 1);
-    digitalWrite(m2p, (rowIndex & 2) >> 1);
-    digitalWrite(m4p, (rowIndex & 4) >> 2);
-    digitalWrite(m8p, (rowIndex & 8) >> 3);
-    for (byte columnIndex = 0; columnIndex < columnCount; columnIndex++)  // Now iterate through each of the column pins that are connected to the current row pin.
-    {
-      byte columnPin = columns[columnIndex];                              // Hold the currently selected column pin in a variable.
-      pinMode(columnPin, INPUT_PULLUP);                                   // Set that row pin to INPUT_PULLUP mode (+3.3V / HIGH).
-      byte buttonNumber = columnIndex + (rowIndex * columnCount);         // Assign this location in the matrix a unique number.
-      delayMicroseconds(10);                                              // Delay to give the pin modes time to change state (false readings are caused otherwise).
-      previousActiveButtons[buttonNumber] = activeButtons[buttonNumber];  // Track the "previous" variable for comparison.
-      byte buttonState = digitalRead(columnPin);                          // (don't)Invert reading due to INPUT_PULLUP, and store the currently selected pin state.
-      if (buttonState == LOW) {
-        if (diagnostics == 1) {
-          Serial.print("1");
-        } else if (diagnostics == 2) {
-          Serial.println(buttonNumber);
-        }
-        if (!previousActiveButtons[buttonNumber]) {
-          // newpress time
-          activeButtonsTime[buttonNumber] = millis();
-        }
-        // TODO: Implement debounce?
-        activeButtons[buttonNumber] = 1;
-      } else {
-        // Otherwise, the button is inactive, write a 0.
-        if (diagnostics == 1) {
-          Serial.print("0");
-        }
-        activeButtons[buttonNumber] = 0;
-      }
-      // Set the selected column pin back to INPUT mode (0V / LOW).
-      pinMode(columnPin, INPUT);
-    }
-  }
-}
-
-void playNotes() {
-  for (int i = 0; i < elementCount; i++)  // For all buttons in the deck
-  {
-    if (activeButtons[i] != previousActiveButtons[i])  // If a change is detected
-    {
-      if (activeButtons[i] == 1)  // If the button is active (newpress)
-      {
-        if (currentLayout[i] < 128) {
-          strip.setPixelColor(i, strip.ColorHSV((currentLayout[i] % 12) * 5006, 255, 255));
-          noteOn(midiChannel, (currentLayout[i] + octave) % 128, midiVelocity);
-        } else {
-          commandPress(currentLayout[i]);
-        }
-      } else {
-        // If the button is inactive (released)
-        if (currentLayout[i] < 128) {
-          setLayoutLED(i);
-          noteOff(midiChannel, (currentLayout[i] + octave) % 128, 0);
-        } else {
-          commandRelease(currentLayout[i]);
-        }
-      }
-    }
-  }
-}
-
-void heldButtons() {
-  for (int i = 0; i < elementCount; i++) {
-    if (activeButtons[i]) {
-      //if (
-    }
-  }
-}
\ No newline at end of file